【气动多头钻 HDZ-120×1700】

 气动多头钻 HDZ-120×1700

Pneumatic Mult-head Drilling Machine
本设备主要用于加工幕墙、铝合金型材铜管、铝管、铁管上的通孔或不通孔，亦可加工业型材和窗料，由于采用电机、气缸直联式输出，因而钻孔更平稳，精度高。本机床可装钻夹头和多孔钻座，使钻孔时更加方便。
This equipments primarlly used for processing the bore of non-bore on the profile of curtain wall and aluminum m e t al alloy type primarily,may also the processing industry type material anticipates with the window,because of adopting the motor and the direct-ally style outputs of cylinder,as a result,drilling a hole more steady and the accuracy is high.This machine bed can pack to the head of clip-drill and the drills with many bore,making drill a hole more convenient.
主要技术参数MAIN TECHNIQUE PARAMETER
动力头数量The quantity of power-drill
工作台尺寸Work table dimension
加工面的直线度Cutting   surface roughness
动力头上下移动最大距离Max.distance of power-drill moves from up to down
每组孔最小距离Min.drstance vetweeneach hole
钻头进给速度(可调)Drilling head feeding speed
最大钻销孔径Max.drill and cut hole diameter
最小钻削孔径Min.drill and cut hole diameter
加工铝型材最大长度Max.processing aluminum profile length
电动机功率Motor power 
电动机转速Motor rotation speed
机床重量Weight
(孔距尺寸及钻头数量随客户选用的参数不同而改变)
The hole diameter size is changed by the the diffent power-drill parameter that choosed by the customer
2～8
100×700mm
±0.1mm
100mm
120mm
0.1-0.2mm/r
13mm(single hole)
2mm
1700mm
4×0.7kw
无极调速
about 600kg