【铝型材多头组合钻床】

气动多头群钻     HKT-368B

Pneumatic Mult-head Drilling Machine

本设备主要用于加工幕墙、铝合金型材上的通孔或不通孔，亦可加工业型材和窗料，由于采用电机、气缸直联式输出，因而钻孔更平稳，精度高。本机床可装钻夹头和多孔钻座，使钻孔时更加方便。

This equipments primarlly used for processing the bore of non-bore on the profile of curtain wall and aluminum m e t al alloy type primarily,may also the processing industry type material anticipates with the window,because of adopting the motor and the direct-ally style outputs of cylinder,as a result,drilling a hole more steady and the accuracy is high.This machine bed can pack to the head of clip-drill and the drills with many bore,making drill a hole more convenient.

主要技术参数MAIN TECHNIQUE PARAMETER

 动力头数量The quantity of power-drill

工作台尺寸Work table dimension

钻头前后移动最大距离Max.distance of drilling head moves from front to rear

加工面的直线度Cutting   surface roughness

动力头上下移动最大距离Max.distance of power-drill moves from up to down

每组孔最小距离Min.drstance vetweeneach hole

单组孔最小距离   台湾产动力头Min.drstance vetweeneach hole

钻头进给速度(可调)Drilling head feeding speed

最大钻销孔径Max.drill and cut hole diameter

最小钻削孔径Min.drill and cut hole diameter

加工铝型材最大断面尺寸Max.processing aluminum profile end size

加工铝型材最大长度Max.processing aluminum profile length

电动机功率Motor power

电动机转速Motor rotation speed

机床重量Weight

 (孔距尺寸随客户选用的动力头参数不同而改变)

The hole diameter size is changed by the the diffent power-drill parameter that choosed by the customer

4~6

240×220mm

60mm

±0.1mm

150mm

245mm

20~22mm(power-drill maked in TA/WAN)

0.1-0.2mm/r

15mm(single hole)

3mm

200×260mm

5700mm

4×0.75kw

1400r/min

about 1500kg